Flush Mounted Dry Contact Pir Infrared Motion Sensor For Smart Lighting Control Systems

IP20 Flush Mounted PIR movement Sensor for the corridor with max. 6m mounting height

1. Features

1) PIR motion detection
2) Accurate NO/NC dry contact output
3) Daylight sensor detection is available
4) Detection area, hold time, and daylight threshold can be set by remote/DIP switch
5) Max detection range: 5-8m in diameter
6) Factory setting is NO dry contact, yet can switch to NC by remote
7) Hallway and Toilet motion detection is highly recommended
8) For surface mounted version, you may check MSA222D IR

2. Parameters

3. Dimension

4. Wiring Diagram

5. Start Process & Initialization

When powered on, the sensor indicator will turn off after flashing for 10S and will not detect a moving signal during this time. After 10S, you can use our MH10 remote or dip switch to adjust the detection area, hold time, and daylight sensor.

6. Factory Settings

Detection Area: 100% Hold Time: 5s Daylight Sensor: Disable

7. Detection radiation

8. DIP Settings

Detection Area

Hold Time

Daylight Sensor

**Once the daylight sensor is set as Disable, our motion sensor will detect human movement regardless of the environment lux

10. Remote Control

Dry contact Pir Infrared Motion Sensor

Flush Mounted Pir Infrared Motion Sensor

Smart Lighting flush mount pir sensor

Flush Mounted Dry Contact Pir Infrared Motion Sensor For Smart Lighting Control Systems Images